UCMP M10 X 110 / 20 HD

UCMP M10 X 110 / 20 HD

Product Description

The UCAS Undercut Anchor is a heavy duty mechanical undercut anchor designed to develop a ductile steel failure. The UCAS Undercut Anchor System includes either the UCMP and UCFP pre-setting or UCMT and UCFT through-fastening type anchors, pilot bits, under cutter, setting tool, and under cutting quality detection device for all of model. The UCAS Undercut Anchor is available om a sherardized and type 316 stainless steel versions for outdoor environments offered in two lengths to accommodate various material thicknesses to be fastened.

Product Features

• Undercut segments provide cast-in-place same performance withe none expansion stresses.
• Under cutter provide an easy and reliable anchor installation.
• Excellent performance in cracked and none cracked concrete.
• Undercut keying load transfer allows for reduced edge distances and anchor spacing.
• Through-fastening type provides increased shear capacity.
• Unmovable and Fully removable.
• Type 316 stainless steel for corrosive environments.
• Sherardized zinc coating has equivalent corrosion resistance to hot dipped galvanizing.

Guide Specification

Undercut anchors shall be of an undercut style with under cutter on the embedded end that perform the undercutting process. Undercut portion of anchor shall have a minimum projected bearing area equal to or greater than 6.0 times the nominal bolt area. The bolt shall confirm to ISO 898 class 8.8 strength requirements. Anchors dimensioned and supplied by UCAS.